Welcome to - Official website of Wuxi Jiangshan Machinery Co., Ltd.
Add to favorites    |   Email    |   Sitemap   |   Contact us      CHINESE   ENGLISH   JAPANESE
Service Hotline
(86) 510-8025 6945
News
What are the difficult-to-cut materials and their cutting fluids?
Publisher:admin  Time:2016-1-19 13:59:14  Click:3928

Since it is more difficult than general cutting, the cutting fluid of such materials must also have different properties, and it is hoped that it will be beneficial to reduce the cutting difficulty. Among the difficult-to-cut materials, some have higher hardness, reaching 65-70HRC; some have very low thermal conductivity, so that the heat in the cutting zone cannot be conducted quickly; others are very high in hardness and strength, and the material is chemically active, elastic mode. The extremely small amount and large elastic recovery and large elongation rate all cause cutting difficulties.


When cutting various difficult-to-cut materials, select the appropriate cutting fluid according to the respective properties, cutting characteristics and processing stages of the material to be cut. The purpose is to improve the machinability of difficult-to-cut materials to achieve the purpose of processing. Commonly used cutting fluids include aqueous solution, common emulsion, extreme pressure emulsion, mineral oil, vegetable oil, animal oil, extreme pressure cutting oil, etc. Various cutting fluids will have different effects on the above materials.
For high-strength steel, in addition to the common cutting fluid and extreme pressure cutting fluid, it can also use soybean oil or rapeseed oil as the tapping cutting fluid, which can also have good results.

Pre:Design of chain wheel seat and working face in chip conveyor
    
About us   News   Career Opportunities    Contact us    Site index Print this page   Email us   Back to top
 
You are welcome to contact us at Jiangshan Machinery through the following contact methods, We sincerely welcome you to contact us by phone or email to discuss related matters.
  Address: No. 80, Qunxing Road, Mei Village, Xinwu District, Wuxi, Jiangsu, China
  Telephone:0510 - 8025 6945
  Fax:0510 - 8025 6948
  E-mail:13338111005@163.com
Product
About
Service Support
 
 
Privacy Policy     Terms of use   
COPYRIGHT © 2018 Wuxi Jiangshan Machinery Co., Ltd. Copyright is owned by the company. Unauthorized, no other company or individual is allowed to copy or copy it!
WUXI JIANGSHAN MACHINERY CO.,LTD. ALL RIGHT RESERVED. Specializing in the production of chip conveyor, oil water separator, chip liquid filtration